Skip to the main content.

CADMOULD PACK
Simulate the packing phase
 

Capture the packing pressure and cooling phase of your component, building on the filling phase results from CADMOULD Fill.

Want to explore what you can do with CADMOULD Pack?

TALK TO AN EXPERT

CADMOULD PACK

CADMOULD Pack extends the simulation to the packing phase of plastic injection molding. This lays an important foundation for solving shrinkage and warpage issues, as well as improving cycle times and optimizing clamping forces.

CADMOULD Pack, Snapshot of Temperature during packing phase

 

CADMOULD Pack: Visualize frozen layer thicknessCADMOULD Pack enables you to visualize the evolution of frozen layer thickness across your packing phase.

Curious to learn more?

15 minutes with an expert and you'll learn everything you need to know!

Book free consultation

 

Simcon expert

 

CADMOULD Pack 1

 

CADMOULD Pack Results

CADMOULD Pack computes the following results for the packing phase of plastic injection molding:

  • Pressure distribution
  • Temperatures
  • Clamping forces
  • Surface layer thickness
  • Melt core in cross-section
  • Volume shrinkage
  • Thickness shrinkage / sink marks
  • Cooling time and shot volume, incorporating the influence of the packing phase

 

Benefits of using CADMOULD Pack

  • Optimally specify packing pressure, clamping force, and cooling phase parameters
  • Reliably determine freezing, sealing and demolding times
  • Achieve uniform volume shrinkage distribution over the molded part
  • Avoid sink marks
  • Reduce part warpage through optimized shrinkage compensation (calculation of shrinkage and warpage results also requires the Warp module)
  • Analyze temperatures and pressures to ensure reliable demolding
  • Determine key data for part and tool costing by determining an optimized packing pressure and cooling phase with the software
  • Optimize existing processes to achieve shorter cycle times, or in order to enable switching to a different injection molding machine

Anticipate sink marks using CADMOULD Pack

Simulating the packing phase is crucial if you want to anticipate sink marks.

Free webinar:
How to minimize shrinkage and warpage...

...by optimizing the packing phase of your plastic injection molding project, using CADMOULD Pack?

Our expert Max Mades will explain! Check out our free webinar!

CADMOULD Modules and packages

 

Packages and modules...

CADMOULD Pack builds on top of CADMOULD Fill (filling simulation). Ideally, it is combined with CADMOULD Cool, Fiber and Warp, so that you can simulate  shrinkage and warpage.

CADMOULD Pack is included in all packages starting with Warp-it! (Though technically, you do also have the option of  purchasing or renting it separately.)

SEE MODULES & PACKAGES

 

Want to talk about pricing, purchasing and rental options?

 

TALK TO OUR SALES TEAM

Talk to the SIMCON Sales team

 


READY TO GO?

JOIN OUR BOOTCAMP!

In just one day, we'll get you up and running, and ready for your first simulation projects.

After the seminar, you'll receive a four-week unrestricted trial version of our software. That way, you can apply what you've learned in the wild, in your first projects.

JOIN OUR BOOTCAMP & GET A TRIAL VERSION

Injection Molding Simulation Bootcamp