Dr. Bastiaan Oud (SIMCON) with Alexander Dangel and Philipp Beckel (GOLLMER Formen)
Link to the future: How ENGEL & SIMCON enable a better way of working
Bi-directional communication between the simulation and the machine makes it easier for engineering and the shop floor to collaborate effectively.
Fast series production with significantly reduced warpage. This was the result of PLASTON and GOLLMER Formen working together to refine the mold design of the innovative hybrid adapter plate.
A UniversaL adapter is designed to enable the stacking of transport boxes from different manufacturers
Warpage was one of the biggest problems, because dimensional accuracy was the most important criterion for this component, which is intended to make various transport boxes combinable with each other. German mold maker Gollmer Formen helped refine the mold design so that it could be mass produced quickly and with significantly reduced warpage.
TO IDENTIFY THE PROBLEM, VARIMOS' RAPID VARIANT ANALYSIS WAS USED TO LOOK FOR SOLUTIONS.
In the whitepaper "One adapter to stack them all" you can read the approach of each step and how SIMCON's software solutions CADMOULD and VARIMOS were used along the way.
→ Download the white paper and learn how Gollmer Formen was able to start serial production in a very short time
Tear down this wall: ARBURG and SIMCON connect simulation and machine
Paperless parameter transfer from simulation to the injection molding machine is crucial, if injection molders want better results.
Simulation and variant analysis optimizes innovative adapter
Fast series production with significantly reduced warpage. This was the result of PLASTON and GOLLMER Formen working together to refine the mold...